Clustering Simplified Archives - Page 104 of 114

SQL Server 2012 Alwayson Multisite Failover Cluster Instance White Paper

February 10, 2018 by Jason Aw Leave a Comment

Building SQL Server Multisite Clusters

Here is an excellent white paper on SQL Server Multisite Clusters, however they forget to mention that you can also do this with host based replication. Instead, they assume you have “two EMC Symmetrix VMAX enterprise storage arrays, one at each site. The arrays were both configured with two VMAX storage engines and 240 disk drives”.

How About A More Cost Effective Solution?

If you have a million dollar budget for storage, go ahead and knock yourself out. If not, look into some Fusion-io PCIe Flash storage and host based replication with DataKeeper cluster edition. It is faster than a SAN at a fraction of the cost with all the availability. Check out how Polaris Industries did just this http://www.fusionio.com/blog/polaris-sios/

Reproduced with permission from https://clusteringformeremortals.com/2013/02/05/sql-server-2012-alwayson-multisite-failover-cluster-instance-white-paper/

DataKeeper Cluster Edition for SQL Server High Availability In AWS Cloud

February 9, 2018 by Jason Aw Leave a Comment

The potential cost savings of moving to the cloud is nearly impossible not to consider. However, after you stop counting the money you are going to save, you start thinking about things like security and availability and wonder whether the cloud is for you. But fear not, we’ve got just the right solution – SIOS Datakeeper Cluster Edition.

In a traditional data center, you have the control and can deploy whatever security and high availability solution you like. However, once you decide to move your servers to the cloud your choices can become much more limited. It doesn’t matter whether you’re with Amazon, Google or Microsoft, outages in the cloud can and do occur and you need to do whatever you can to mitigate such risks.

Amazon Web Services

Let’s take a closer look at Amazon Web Services (AWS) for instance. What are the options you have to ensure that your SQL Server database can survive an unexpected outage? While some applications can be deployed in a load balanced configuration across multiple availability zones, SQL Server is generally not deployed in a load balanced configuration. What this means is that SQL Server itself resides in a single availability zone and if that zone should become unavailable, your whole application stack can come to a grinding halt.

SQL Server 2008 R2 and its limitations

If you read this article by Miles Ward, you will see that with SQL Server 2008 R2, your availability options are pretty limited. In that article on page 11, there is a nice chart that lays out your HA options. As you will see, the options are severely limited and mostly fall outside of the category which would be described as HA. Log shipping, mirroring and transactional replication are pretty much the only options you have, and they are more of a data protection options rather than HA options. If you want Microsoft failover clustering, you will find yourself out of luck due to some network limitations (clients can’t connect to a clustered IP address) in AWS and the lack of a shared disk resource required for traditional SQL clusters.

AWS

If you are looking to deploy SQL Server 2012, your options get a little better. As described by Jeremy Peschka, with a little manual intervention you can deploy AlwaysOn Availability Groups in AWS to do asynchronous replication from your data center to AWS, or even between AWS availability groups. Of course this assumes you have the SQL 2012 Enterprise license required for AlwaysOn Availability Groups. The only “issue” is that AWS really doesn’t support moving cluster IP address from one server to another, so client redirection has to be done manually using the ec2-unassign-private-ip-addresses and ec2-assign-private-ip-addresses commands after switchover that Peschka describes in his article. All-in-all this is a very manual process, which again does not really fit the description of a highly available system.

A Solution To The Limitations

If you can live without automated recovery and with the limitations of AlwaysOn Availability Groups that I described in a previous blog post, then you might just want to go ahead and try the AlwaysOn Availability Group deployment in AWS. However, if you are looking for an easier, more affordable, more robust HA solution, I have some really good news. SIOS Technology Corp has been looking at this problem and has developed a solution that overcomes all of the limitations previously described and will be available as an AMI for easy deployment. This solution is currently in private beta, but will be widely available later this year.

SIOS DataKeeper Cluster Edition

The SIOS solution is based on SQL server in a Microsoft Failover Clustering using DataKeeper Cluster Edition host based replication. By using hosted based replication they have overcome the first obstacle of clustering in EC2 – lack of shared storage. The second obstacle that SIOS had to overcome was the issue of client redirection described by Peschka; the client access point needs to be manipulated from within EC2, not failover clustering. SIOS has built intelligence into their AMI solution such that the reassigning of the IP address is automated as part of the cluster failover process, effectively simulating the behavior you would normally expect from a cluster.

And because all of this is built on top of failover clustering, this can be deployed using SQL 2008/2008 R2 or 2012. Even the Standard Edition of SQL Server will support a 2-node cluster so the cost savings vs. deploying SQL 2012 AlwaysOn Availability groups could be substantial.

Let me know what you think. Does SIOS Datakeeper Cluster Edition sound interesting? What are you doing today to ensure the availability of your SQL Server EC2 instances?

Reproduced with permission from https://clusteringformeremortals.com/2013/01/11/sql-server-high-availability-in-aws-cloud/

Clustering SQL Server 2012 On Windows Server 2012 with DataKeeper

February 9, 2018 by Jason Aw Leave a Comment

A Little Recap

In my previous post I walked through the process of building a 2-node cluster up to the point where we are ready to start clustering SQL Server 2012 on Windows Server 2012. If you have completed those steps, you are ready to move on and actually create your clustered application with my suggested SIOS Datakeeper Cluster Edition.

Next step, clustering SQL Server 2012

First up, we have SQL Server 2012. SQL Server 2012 cluster installation is pretty much identical to SQL 2008/2008 R2 cluster installations, so most of this will apply even if you are using SQL 2008/2008 R2. The terminology around SQL Server 2012 Clustering gets a little convoluted. You will hear mention of SQL Server AlwaysOn, which essentially could mean one of two different things: AlwaysOn Availability Groups or AlwaysOn Failover Cluster Instance. The confusion arises because both solutions require some level of integration with Windows Server Failover Clustering and it is even further confused by the fact that you can deploy a combination of AlwaysOn Availability Groups and AlwaysOn Failover Clustering, but that is a topic for another day!

Breaking It Down In Easy-To-Understand Terms

Essentially AlwaysOn Availability Groups is what used to be called Database Mirroring in SQL 2008 R2 and earlier. It has some new bells and whistles that overcome some of the limitations of earlier versions of database mirroring, so it is certainly worth checking it out. AlwaysOn Failover Cluster Instance is simply what used to be called a SQL Server Failover Cluster. This is the latest edition of the same clustering technology that has been available since early versions of SQL Server. One of the best new features of SQL Server 2012 AlwaysOn Failover Cluster Instance is the ability to have nodes in different subnets. This was a major limitation in earlier versions of SQL Server. In a previous blog entry I discussed some of the limitations of AlwaysOn Availability Groups, you should check that out before you make any decisions on which technology to deploy.

Let’s Start

With that said, this article is going to focus on the Step-by-Step instructions on deploying a SQL Server 2012 AlwaysOn Failover Cluster Instance.

Step 1

Make sure your cluster storage is ready. If you followed the instructions in my previous post, you will know that instead of a shared disk resource, we are going to use a replicated disk resource using the 3^rd party software DataKeeper Cluster Edition. If you are using shared storage and have added the storage than you can skip right to Step 2 where we begin the SQL install. Otherwise, follow the steps below to configure the software to replicate the local disks for use in a SQL cluster.

Configuring DataKeeper Cluster Edition

Install and configure DataKeeper Cluster Edition
1. Run DK Setup
2. Go through the entire installation process selecting all of the default values.
3. Restart the computer after the installation completes as prompted and repeat the process on the SECONDARY server
4. Launch the DataKeeper UI on PRIMARY and click Connect to Server. Connect to PRIMARY and then connect to SECONDARY
5. Click on Create Job and walk through the Create Job wizard to create a mirror of the E drive
  
  Choose the source volume of the mirror and the IP address of the NIC that will carry the replication traffic.
  
  Choose the target of the mirror and click Next
  
  Here you will choose your mirror options:
  Compression – only enable for replication across a WAN
  Asynchronous – choose this for all WAN replication
  Synchronous – this is ideal for LAN replication
  Maximum bandwidth – used in WAN replication as a way to put a cap on the amount of bandwidth replication is allowed to use. Generally it should be left on 0, however for initial mirror creation you may want to limit the bandwidth so replication does not use all available bandwidth to do the initial synchronization
  
  Once you click Done the mirror will be created.
  
  Once the mirror is created you will be prompted to register the volume in Windows Server Failover Clustering (WSFC). Click Yes and a new DataKeeper Volume Resource will be registered in Available Storage (see picture in Step 2).

Step 2

We are going to begin the installation of SQL Server 2012 on the first cluster node.

Before we begin, make sure your storage appears in Failover Cluster Manager and is assigned to the Available Storage group as shown below
At this point we are going to launch the SQL Server 2012 setup and go to the Installation Tab and click New SQL Server failover cluster installation
Step through the installation as shown in the following screen shots.

The following error is expected if your servers are not connected to the internet. If you are connected to the internet you should go ahead and accept the updates it finds.

For Service Account best practices read the following: http://msdn.microsoft.com/en-us/library/ms143504.aspxFor our lab purposes I am just using the Administrator account

Before you click next, click on the Data Directories tab and change the location of tempdb. With Windows Server 2012 tempdb no longer has to reside on the cluster storage. In our example we are moving tempdb to the C drive to avoid replicating unnecessary data.

At this point you will need to make sure to create the same tempdb directory on the SECONDARY server as advised by the warning.

Congratulations, the 1^st cluster node has been installed.

We are now ready to install SQL on the second node of the cluster.

Go to the SECONDARY server and launch the SQL Server 2012 Setup and follow the wizard as shown in the following screen shots, starting with clicking on Add node to a SQL Server failover cluster.

The following error is expected if your servers are not connected to the internet. If you are connected to the internet you should go ahead and accept the updates it finds.

Congratulations – you have built a 2-node SQL Server 2012 AlwaysOn Failover Cluster Instance. Open up Failover Cluster Manager and you should see something that looks like this.This article “clustering SQL Server 2012 in a Windows Server 2012 cluster” was meant to be just a quick run through on how to install SQL 2012 in a Windows Server 2012 cluster. For additional reading start here and let Google be your friend!

Reproduced with permission from https://clusteringformeremortals.com/2013/01/05/clustering-sql-server-2012-on-windows-server-2012-step-by-step/

Clustering Windows Server 2012 Step-By-Step

February 8, 2018 by Jason Aw Leave a Comment

Basic Steps Of Any Cluster

This article is the first in a series of articles on Clustering Windows Server 2012. This first article covers the basics first steps of any cluster, regardless of whether you are clustering Hyper-V, SQL Server Failover Clusters, File Servers, iSCSI Target Server or others. Future articles will cover more detailed instructions for each cluster resource type, but the following information is applicable to ALL clusters.

I’m assuming you know a little bit about clusters and why you would want to build one, so I won’t go into those details in this particular post. I also assume you are familiar with Windows Server 2012 and basic things like DNS, AD, etc. It is also worth noting that in Windows Server 2012 failover clustering comes with every edition, unlike Windows Server 2008 R2 and earlier where failover clustering was only included in Enterprise Edition and above.

Focus On Basic 2-Node Cluster

This particular series will focus on a basic 2-node cluster, where we have two servers (named PRIMARY and SECONDARY) running Windows Server 2012 in a Windows Server 2012 Domain (domain controller named DC). It also assumes that PRIMARY and SECONDARY can communicate with each other over two network connections I have labeled PUBLIC and PRIVATE. In production scenarios these network connections should run through entirely different network gear (switches, routers, etc) to eliminate any single point of failure.

Let’s Start! Clustering Windows Server 2012, here we go!

This series will be written in a very basic, step-by-step style that walks you through the process in an ordered list with basic instructions and plenty of screen shots to help illustrate the procedure where needed. So let’s begin at the beginning…

Add the Failover Clustering Feature on all of the servers you want to add to the cluster
1. Open the Server Manager Dashboard (this 1^st step will need to be completed on both PRIMARY and SECONDARY)
2. Click on Add roles and features
3. Choose Role-based or feature-based installation
4. Choose the server on which you wish to enable the failover cluster feature
5. Skip over the Server Roles page
6. On the Features page select Failover Clustering and click Next and then confirm the installation
Before we start configuring the cluster, we need to consider what kind of storage the cluster will use. Traditionally clusters will use some sort of SAN, but with Windows 2012 not all clusters will use a SAN. For instance, if you are building a cluster to support SQL Server AlwaysOn Availability Groups your storage will be replicated by SQL Server, eliminating the need for a SAN. Also, with SMB 3.0 being support as cluster storage for Hyper-V and SQL Server you may not have a traditional SAN for storage. And let’s not forget clustered Storage Spaces with shared SAS drives is also a possibility in Windows Server 2012. In addition to the options mentioned above, you also can use local disks and 3^rd party host based replication solutions like DataKeeper Cluster Edition which is an excellent alternative which I blog about pretty frequently.For the purposes of this post to share about Clustering Windows Server 2012 , I am going to assume you have no shared storage. However, if you do have shared storage at this point you should configure you storage such that you have LUN(s) carved out and shared with each of the cluster nodes with one LUN being used as a disk witness and the remaining LUNs can be used for the application which you want to cluster. In lieu of a disk witness for our quorum, I am going to use a node and file share witness quorum type which I will explain later.
Now that Failover Clustering is enabled on each server, you can open the Failover Cluster Manager on your PRIMARY server. The first thing we will want to do is to run “Validate Configuration” so we can identify any potential issues before we begin. Click on Validate Cluster
Step through the Validate a Configuration Wizard as shown in the following steps.
1. Select the servers you want to cluster
2. Run all tests (depending on what roles you have installed on the servers you may get more or less tests. For instance, if Hyper-V is enabled there are new Hyper-V specific tests for clusters)
3. Assuming your cluster “passed” validation you should have a report that looks similar to mine. You will notice that my report contains “warnings” but no errors. It is important for you to view the report and understand what warnings might be present, but you as long as you understand the warnings and they make sense for your particular environment you can move on. If you validation “failed”, you MUST fix the failures before moving on. Click View Report to view the report
4. You will see all of my warnings are related to storage, so I am not concerned since I have not configured any shared storage, so I would expect some of these thests to produce warnings.

Once Validation completes without any errors, you will automatically be thrown into the Create Cluster Wizard. Walk through this wizard as shown below to create your basic cluster.
1. In this first screen you will choose a name for your cluster and pick an IP address that will be associated with this name in DNS. This name is just the name used to manage your cluster – this is NOT the name that your clients will use to connect to the clustered resource(s) you will eventually create. Once you create this access point a new computer object will be created in AD with this name and a DNS A record will be created with this name and IP address.
2. On the confirmation screen you will see the name and IP address you selected. You will also see an option which is new with Windows Server 2012 failover clustering…”Add all eligible storage to the cluster”. Personally I’m not sure why this is selected by default, as this option can really confuse things. By default, this selection will add all shared storage (if you have it configured) to the cluster, but I have also seen it add just local, non-shared disks, to the cluster as well. I suppose they want to make it easy to support symmetric storage, but generally any host based or array based replication solutions are going to have some pretty specific instructions on how to add symmetric storage to the cluster and generally this option to add all disks to the cluster is more of a hindrance than a help when it comes to asymmetric storage. For our case, since I have no shared storage configured and I don’t want the cluster adding any local disks to the cluster for me automatically I have unchecked the Add all eligible storage to the cluster option.
3. After you click next you will see that the cluster has finished the creation process, but there may be some warnings. In our case the warnings are probably related to the quorum configuration which we will take care of in the next step. Click View Report to check out any warnings.
  
  You see that the warning is telling use to change the quorum type.
Because we have no shared storage, we will not be using a Node and Disk Majority quorum as suggested. Instead, we will use and Node and File Share Majority quorum. The following steps will help us configure the Node and File Majority Quorum
1. A File Share Witness needs to be configured on a server that is not part of the cluster. A file share witness is a basic file share that the cluster computer name (MYCLUSTER in our case) has read/write access. The first step involves creating this file share. In our example, we are going to create a file share on our DC and give MYCLUSTER read/write access to it.
2. The file share does not need to reside on a Windows 2012 server, but it does need to be on a Windows Server in the same domain as the cluster. The important thing to remember is that the cluster computer name that we created needs read/write access at both the share level and NTFS level. The following are some screen shots that walk you through this process on the DC server which is running Windows Server 2012 in my lab.
3. Now that we have the file share created on DC, we will go back to PRIMARY and use the Failover Cluster Manager to change the quorum type as shown in the following steps.
  
  If by chance this wizard fails, it is most likely related to the permissions on the file share. Make sure you give the cluster computer name read/write permissions at BOTH the file share and security (NTFS) level and try again.
You now have a basic 2-node cluster and are ready to move on to the next step of series Clustering Windows Server 2012 which is creating your cluster resources. I will be publishing a series of articles on how to cluster different resources, starting with SQL 2012 in my next post.

Reproduced with permission from https://clusteringformeremortals.com/2012/12/31/windows-server-2012-clustering-step-by-step/

Datakeeper Cluster Edition 7.5 Now Support Windows Server 2012

February 7, 2018 by Jason Aw Leave a Comment

Benefits Of Using DataKeeper Cluster Edition

Great news for you Windows Server 2012 early adopters – you can now use DataKeeper Cluster Edition with Windows Server 2012. I’ll be posting some Windows Server 2012 Step-by-Step articles before the end of the year and will be sure to include some multisite cluster examples as well. In the meantime, if you want to build clusters based on Windows Server 2012 and want to eliminate shared storage as a single point of failure or you want to stretch your cluster across geographic locations you can do that with DataKeeper Cluster Edition v7.5.